A Few Tips On Satellite Installation To Make Things Easier

Satellite-dish-on-balcony1641With today’s current advances in television technology it is slowly but surely becoming easier and easier for almost anybody to acquire satellite TV, but keep in mind that not everyone knows how to install a satellite dish but when compared to the cost of having it installed you might just consider these instructions for installing a satellite dish. With so many websites out there telling you how to do it yourself it’s almost impossible not to get some decent instructions online. Only use trusted and reputable websites when seeking proper instructions for installing a satellite dish.

Now before we get started let’s first establish what essentials you would need before starting the installation process.

  • The full and complete satellite installation system
  • A satellite signal meter which is optional
  • RG6 coax cable
  •  Any decent Magnetic or Post level
  • Adjustable wrenches
  • Drill
  • Appropriately issued nuts and bolts
  • Cable ties

The Basic Instructions Of Installation

Now that we have all the accessories that we need we can proceed. Please remember that these are only basic instructions for installing a satellite dish that you must always refer to your satellite dish installer’s manual.

  1. First find a safe place to mount and install satellite dish, but be sure that there are no obstructions of any kind in its way like trees or walls.
  2. Once you have established the area on your house start with bolting down the mast and make sure that this is firm and secure. It is very important that the mast is plumb in any direction, use the magnetic or Post level to help you.
  3. From here you can place and install satellite dish onto the mast and bolt it loosely but do not fasten it yet.
  4. Carefully take the coax cable and run it through the satellite dish and connect it to the LNBF and make sure that it’s securely fastened.
  5. After your cables are connected it’s time to adjust the dish. Your dish needs to face in a south westerly direction or alternatively look at your neighbor and copy what he’s, but still keeping in mind not to fasten down the dish.
  6. Now you need to test the signal. You could save time by using a signal meter that you should be able to get from any electronics store. Plug the coaxial cable into the meter.
  7. In order for the cable to run trough into your home you’ll probably need to drill a hole through the appropriate wall and use this cable to connect to the receiver. After wards you need to connect the receiver to the television suing the coaxial cable.
  8. Lastly you can connect the receiver to the electrical outlet and end this off with connecting it to the telephone line. Refer to you satellite dish installers manual for details.
  9. Finally make sure the signal is at its strongest and voila.

Always follow the manufacturer’s instructions for installing a satellite dish and contact a technician if you’re unsure about specifics like configuring your bell pvr.

500 Plus Satellite Dish Installation

It seems everyone wants to install their satellite dishes by themselves these days, and although there’s nothing wrong with saving yourself a few bucks it is advised to do your research and be cautious when you try the dish 500 plus satellite installation. The only reason why people opt to install these themselves is to save some money and if you’ve got a little common sense it’s not all that intimidating.

Although the dish 500 is the younger brother satellite of its bigger relative the dish 1000 it still means if you can do the dish 500 plus satellite installation you’ll still enjoy the ability to watch just over 500 channels in crystal clear quality and sound.

500 Dish Mounted on Tree Next to Bicycle Storage Shed. 

So where do we start in the whole installation process? If you’ve received the full dish 500 satellite system then the manual should indicate that for you. Try some of these tips to ensure you not only install it well but that you get a crystal clear signal.

Dish 500 Plus Satellite Installation

  • Start by making sure that you’ve got the azimuth, elevation and skew angles and the specifics of your location.DIW500
  • Select a part of your house that has a big clearing and mount the mast but make sure that it’s absolutely vertical, stable and tightly secure.
  • Add the antenna and dish onto the mast and start adjusting the elevation and skew angles in the process.
  • Once it’s on the mast you can correctly adjust the azimuth angle and trajectory.
  • Next run and connect the cables from the antenna and the switch and then connect the switch to the receiver. Always remember to tie cables down safely.
  • From here you should use the signal meter which is connected to the dish and peak it on directly 119 °W for optimum strength. Then you should be able to tighten all the screws and bolts while still making sure that the dish maintains the signal strength.
  • Attach the switch cables from the LNBF (Low-Noise Block Feedhorn) Port 2D and Port 1F as well as the DP Duals to the switch. Next connect the cables to the LNBF arm with the use of some clips or cable ties.
  • You’re almost done now, attach the switch to the receiver and if you’re unsure of how to do this then refer to the installation instructions that you received.
  • From here on you just need to run some switch tests as indicated in the manual and installation guide to make sure that the appropriate signals are picked up and communicating at the right angles.

After you’ve got everything hooked up and connected it’s just a matter of following your guide and getting your dish 500 channel lineup sorted through the online connection interface. You can do all of this using your trusty dish 500 remote controller.
After the dish 500 plus satellite installation was successfully setup you should now go and secure all the cabling and seal any holes to ensure safety and overall neatness. After that, just enjoy the art of technology and sound.